Jump to Table of Contents

Example: Simple Testing Example

This example shows basic usage of the YUI Test framework for testing browser-based JavaScript code. Two different TestCase objects are created and added to a TestSuite object. The TestRunner is then used to run the tests once the page has loaded.

Simple Test Example

This example begins by creating a namespace:

Y.namespace("example.test");

This namespace serves as the core object upon which others will be added (to prevent creating global objects).

Creating the first TestCase

The first step is to create a new Y.Test.Case object called DataTestCase. To do so, using the Y.Test.Case constructor and pass in an object literal containing information about the tests to be run:

Y.example.test.DataTestCase = new Y.Test.Case({

    //name of the test case - if not provided, one is auto-generated
    name : "Data Tests",

    //---------------------------------------------------------------------
    // setUp and tearDown methods - optional
    //---------------------------------------------------------------------

    /*
     * Sets up data that is needed by each test.
     */
    setUp : function () {
        this.data = {
            name: "test",
            year: 2007,
            beta: true
        };
    },

    /*
     * Cleans up everything that was created by setUp().
     */
    tearDown : function () {
        delete this.data;
    },

    //---------------------------------------------------------------------
    // Test methods - names must begin with "test"
    //---------------------------------------------------------------------

    testName : function () {
        var Assert = Y.Assert;

        Assert.isObject(this.data);
        Assert.isString(this.data.name);
        Assert.areEqual("test", this.data.name);
    },

    testYear : function () {
        var Assert = Y.Assert;

        Assert.isObject(this.data);
        Assert.isNumber(this.data.year);
        Assert.areEqual(2007, this.data.year);
    },

    testBeta : function () {
        var Assert = Y.Assert;

        Assert.isObject(this.data);
        Assert.isBoolean(this.data.beta);
        Assert.isTrue(this.data.beta);
    }

});

The object literal passed into the constructor contains a number of different sections. The first section contains the name property, which is used to determine which Y.Test.Case is being executed. A name is necessary, so one is generated if it isn't specified.

Next, the setUp() and tearDown() methods are included. The setUp() method is used in a Y.Test.Case to set up data that may be needed for tests to be completed. This method is called immediately before each test is executed. For this example, setUp() creates a data object. The tearDown() is responsible for undoing what was done in setUp(). It is run immediately after each test is run and, in this case, deletes the data object that was created by setUp. These methods are optional.

The last section contains the actual tests to be run. Test method names must always begin with the word "test" (all lowercase) in order to differentiate them from other methods that may be added to the object.

The first test in this object is testName(), which runs various assertions on data.name. Inside of this method, a shortcut to Y.Assert is set up and used to run three assertions: isObject() on data, isString() on data.name and areEqual() to compare data.name to the expected value, "test". These assertions are arranged in order from least-specific to most-specific, which is the recommended way to arrange your assertions. Basically, the third assertion is useless to run unless the second has passes and the second can't possibly pass unless the first passed. Both isObject() and isString() accept a single argument, which is the value to test (you could optionally include a failure message as a second argument, though this is not required). The areEqual() method expects two arguments, the first being the expected value ("test") and the second being the actual value (data.name).

The second and third tests follow the same pattern as the first with the exception that they work with different data types. The testYear() method works with data.year, which is a number and so runs tests specifically for numbers (areEqual() can be used with all data types). The testBeta() method works with data.beta, which is a Boolean, and so it uses the isTrue() assertion instead of areEqual() (though it could also use areEqual(true, this.data.beta)).

Creating the second TestCase

Although it's possible that you'll have only one Y.Test.Case object, typically there is more than one, and so this example includes a second Y.Test.Case. This one tests some of the built-in functions of the Array object:

Y.example.test.ArrayTestCase = new Y.Test.Case({

    //name of the test case - if not provided, one is auto-generated
    name : "Array Tests",

    //---------------------------------------------------------------------
    // setUp and tearDown methods - optional
    //---------------------------------------------------------------------

    /*
     * Sets up data that is needed by each test.
     */
    setUp : function () {
        this.data = [0,1,2,3,4]
    },

    /*
     * Cleans up everything that was created by setUp().
     */
    tearDown : function () {
        delete this.data;
    },

    //---------------------------------------------------------------------
    // Test methods - names must begin with "test"
    //---------------------------------------------------------------------

    testPop : function () {
        var Assert = Y.Assert;

        var value = this.data.pop();

        Assert.areEqual(4, this.data.length);
        Assert.areEqual(4, value);
    },

    testPush : function () {
        var Assert = Y.Assert;

        this.data.push(5);

        Assert.areEqual(6, this.data.length);
        Assert.areEqual(5, this.data[5]);
    },

    testSplice : function () {
        var Assert = Y.Assert;

        this.data.splice(2, 1, 6, 7);

        Assert.areEqual(6, this.data.length);
        Assert.areEqual(6, this.data[2]);
        Assert.areEqual(7, this.data[3]);
    }

});

As with the first Y.Test.Case, this one is split up into three sections: the name, the setUp() and tearDown() methods, and the test methods. The setUp() method in this Y.Test.Case creates an array of data to be used by the various tests while the tearDown() method destroys the array. The test methods are very simple, testing the pop(), push(), and splice() methods. Each test method uses areEqual() exclusively, to show the different ways that it can be used. The testPop() method calls pop() on the array of values, then verifies that the length of the array has changed and that the value popped off is 4; the testPush() pushes a new value (5) onto the array and then verifies that the length of the array has changed and that the value is included in the correct location; the testSplice() method tests splice() by removing one value that's already in the array and inserting two in its place.

Creating the TestSuite

To better organize the two Y.Test.Case objects, a Y.Test.Suite is created and those two Y.Test.Case objects are added to it:

Y.example.test.ExampleSuite = new Y.Test.Suite("Example Suite");
Y.example.test.ExampleSuite.add(Y.example.test.DataTestCase);
Y.example.test.ExampleSuite.add(Y.example.test.ArrayTestCase);

The first line creates a new Y.Test.Suite object using its constructor, which accepts a single argument - the name of the suite. As with the name of a Y.Test.Case, the Y.Test.Suite name is used to determine where execution is when tests are being executed. Although not required (one is generated if it's not provided), it is recommended that you select a meaningful name to aid in debugging.

Any number of Y.Test.Case and Y.Test.Suite objects can be added to a Y.Test.Suite by using the add() method. In this example, the two Y.Test.Case objects created earlier are added to the Y.Test.Suite.

Running the tests

With all of the tests defined, the last step is to run them. This initialization is assigned to take place when all of the YUI components have been loaded:

//create the console
(new Y.Test.Console({
    verbose : true,
    newestOnTop : false
})).render('#testLogger');

Y.Test.Runner.add(Y.example.test.ExampleSuite);

//run the tests
Y.Test.Runner.run();

Before running the tests, it's necessary to create a Y.Test.Console object to display the results (otherwise the tests would run but you wouldn't see the results). After that, the Y.Test.Runner is loaded with the Y.Test.Suite object by calling add() (any number of Y.Test.Case and Y.Test.Suite objects can be added to a Y.Test.Runner, this example only adds one for simplicity). The very last step is to call run(), which begins executing the tests in its queue and displays the results in the Y.Test.Console.

Complete Example Source

<div id="testLogger"></div>

<script>
YUI().use('node', 'test-console', 'test', function (Y) {

    Y.namespace("example.test");

    Y.example.test.DataTestCase = new Y.Test.Case({

        //name of the test case - if not provided, one is auto-generated
        name : "Data Tests",

        //---------------------------------------------------------------------
        // setUp and tearDown methods - optional
        //---------------------------------------------------------------------

        /*
         * Sets up data that is needed by each test.
         */
        setUp : function () {
            this.data = {
                name: "test",
                year: 2007,
                beta: true
            };
        },

        /*
         * Cleans up everything that was created by setUp().
         */
        tearDown : function () {
            delete this.data;
        },

        //---------------------------------------------------------------------
        // Test methods - names must begin with "test"
        //---------------------------------------------------------------------

        testName : function () {
            var Assert = Y.Assert;

            Assert.isObject(this.data);
            Assert.isString(this.data.name);
            Assert.areEqual("test", this.data.name);
        },

        testYear : function () {
            var Assert = Y.Assert;

            Assert.isObject(this.data);
            Assert.isNumber(this.data.year);
            Assert.areEqual(2007, this.data.year);
        },

        testBeta : function () {
            var Assert = Y.Assert;

            Assert.isObject(this.data);
            Assert.isBoolean(this.data.beta);
            Assert.isTrue(this.data.beta);
        }

    });

    Y.example.test.ArrayTestCase = new Y.Test.Case({

        //name of the test case - if not provided, one is auto-generated
        name : "Array Tests",

        //---------------------------------------------------------------------
        // setUp and tearDown methods - optional
        //---------------------------------------------------------------------

        /*
         * Sets up data that is needed by each test.
         */
        setUp : function () {
            this.data = [0,1,2,3,4]
        },

        /*
         * Cleans up everything that was created by setUp().
         */
        tearDown : function () {
            delete this.data;
        },

        //---------------------------------------------------------------------
        // Test methods - names must begin with "test"
        //---------------------------------------------------------------------

        testPop : function () {
            var Assert = Y.Assert;

            var value = this.data.pop();

            Assert.areEqual(4, this.data.length);
            Assert.areEqual(4, value);
        },

        testPush : function () {
            var Assert = Y.Assert;

            this.data.push(5);

            Assert.areEqual(6, this.data.length);
            Assert.areEqual(5, this.data[5]);
        },

        testSplice : function () {
            var Assert = Y.Assert;

            this.data.splice(2, 1, 6, 7);

            Assert.areEqual(6, this.data.length);
            Assert.areEqual(6, this.data[2]);
            Assert.areEqual(7, this.data[3]);
        }

    });

    Y.example.test.ExampleSuite = new Y.Test.Suite("Example Suite");
    Y.example.test.ExampleSuite.add(Y.example.test.DataTestCase);
    Y.example.test.ExampleSuite.add(Y.example.test.ArrayTestCase);

    //create the console
    (new Y.Test.Console({
        newestOnTop : false,
        filters: {
            pass: true,
            fail: true
        }
    })).render('#testLogger');

    Y.Test.Runner.add(Y.example.test.ExampleSuite);

    //run the tests
    Y.Test.Runner.run();

});
</script>